$0.00

Cast Bronze Letters
[Cast Metal]

Cast Bronze Letters

Letters for your sign

Quality & Affordability

  • Over 40 standard styles
  • Earth Friendly - no lead or mercury and all trim is recycled
  • Custom letters & logos are available at minimal expense
  • Orders produced in 8 days or less
  • Lifetime guarantee

Step 1

Step 2

Step 3


Step 4

Line 1

Line 2

Line 3

Line 4

The sign is approximately
0" x 0"
Update Display
Line: Upper Case Price: Lower Case Price: Punctuation Price: Line Sub-Total:
Line 1$0.00$0.00$0.00$0.00
Line 2$0.00$0.00$0.00$0.00
Line 3$0.00$0.00$0.00$0.00
Line 4$0.00$0.00$0.00$0.00

If your signage requires a classical look, cast bronze letters are a good choose. When your signage requires weather resistant, durability, and permanence, choose to oxidize your Bronze metal letters for your signage. Letters with a Patina finish within the same order may vary from letter to letter. These finishes will change in appearance over time depending on contact with moisture and temperature. Signage with letters with patina finish may "bleed" onto other surfaces when installed outside. They are upscale for interior office signage.

Cast Bronze letters have stainless steel studs as standard.  Besides the different stud mounts these letters can also be installed on rails for installation of your signage atn difficult height and/or in difficult places. You will need to drill mounting holes in the rails based on your mounting surface.

Sizes range from 2" to 24" with depth from 3/8" to 1 1/2" in over 40 standard styles. These bronze letters are flat face with deep dimension for that classical signage look. 

Choose from one of the 45 standard colors or select a custom color. We can match virtually any color required for your application.

Custom letters (2" - 84") and logos can be cast in almost any shape. If you have vector-based artwork send it to us along with size & quantity requirements for a quote.  Call 507 289-8676 for details and questions. We will work with you from concept to final installation. 

There is much more information than what can be shared here. Call or email us at sales@svesigns.com for a complete catalog. Of course there is no obligation or a sales pitch. 

 

Manufactured by: Gemini

Brushed

Brushed Bronze Alloy NAVY G

Oxidized

Oxidized Bronze Alloy NAVY G

Dark Oxidized

Dark Oxidized Bronze Alloy NAVY G

Polished

Polished Bronze Alloy NAVY G

Traditional Patina

Traditional Patina Alloy NAVY G

Turquoise Patina

Alloy NAVY G

Cast Metal Letters

Cast metal Letters have stud bosses for stud threaded. Cast Letter under 15" are shipped with 3/16" threaded studs - standard. (In areas where the letter is narrower, a smaller stud will be supplied.) Cast Letters over 15" are shipped with 1/4" studs standard. Aluminum studs are standard. (Stainless steel studs are available upon request.) Metal spacers available upon request (just specify stand-off) Stud holes are in line for brick 2-5/8" center mortar as a standard. Also available in line for 8" block center mortar.

Flush Mounting

Studs are set in adhesive cement. There is no space between the letter and the surface. This is the standard installation, no extra hardware is required.

Projected Jam Nut Mounting

Studs are set in adhesive cement. Stainless steel jam nuts are inserts between the letter and the mounting surface

Projected Spacer Mounting

Studs are set in adhesive cement. Pre-cut spacers are inserted between the letters and the mounting surface.

Corrugated Mounting

Studs are set using jam nut on both front and back of corrugation.

Flat Metal Wall Mounting

Where you have access tot he rear of the wall, washers and nuts are used on both sides of the wall.

Built-in Stud Bosses (Custom)

Custom stud boss placement on cast add $12/Letter.

Double Rail Installation

Letters are drilled and tapped, mounted to two Aluminum C-Channel rails using stainless steel screws, aligned and adjusted; then either left assembled (smaller letters) or separated for shipping Maximum rail length is 96" long - additional shipping charges may apply. Specify rails either flush or extended beyond first and last letter. Flat bar stock is substituted for C-Channel with some smaller letters. When installing you will have to drill mounting holes in rail ends, locations based on your mounting surface.

Bottom or Top Rail Installation

Letters are drilled and tapped with a bottom (or top) stud mount, then mounted to an Aluminum C-Channel rail using stainless steel screws. After aligning letters, they are either left attached (smaller letters) to the rail, or separated for shipping. Letters with round bottoms/tops (like O,S,G) will have a flatten base/top to receive screws. Specify rails either flush or extended beyond the first and last letter. Specify letter orientation on all rails (flush to front, center, flush to back) Maximum rail length is 96" - additional shipping charges may apply. Letters over 8" high is required that tieback be used to secure (not supplied) You will need to drill mounting holes in rail ends, location based on your mounting surface.

Bottom or Top Stud Installation - no rail

Letters drilled and tapped from the bottom or the top. You will provide your own bar or channel for mounting. Letters with round bottoms/tops (like O, S, G) will have a flattened base/top to receive studs. Exterior applications greater than 8" letters require tiebacks (not supplied).
Reviews