$0.00

Bronze Letters: Flat Cut
[FlatCutMetal]

Flat Cut Bronze Letters

Gemini Metal Letters for your sign

ALMOST UNLIMITED OPTIONS

Lifetime Guarantee

  • Bronze Metal, 4 Gauges and 6 Finished are Available
  • Fast Delivery — Produced in just 7 days
  • Lifetime Guarantee
  • UV stable

Step 1

Step 2

Step 3

Step 4


Step 5

Line 1

Line 2

Line 3

Line 4

The sign is approximately
0" x 0"
Update Display
Line: Upper Case Price: Lower Case Price: Punctuation Price: Line Sub-Total:
Line 1$0.00$0.00$0.00$0.00
Line 2$0.00$0.00$0.00$0.00
Line 3$0.00$0.00$0.00$0.00
Line 4$0.00$0.00$0.00$0.00

Flat Cut Bronze Letters

Precision Cut, Custom, Bronze Metal Signage Letters

Once designers began using sheet metal for decorative purposes, it was only a matter of time before sign markers began utilizing sheet metals to make metal letters and logos- the sky is the limit in terms of looks and design opportunities. Durable enough for outdoors signage, yet perfect for any interior office signage.

Using water jets and lasers to precisely cut your letters from our standard font or your supplied font, our flat cut letters provide greater detail than manufacturers who use a router.

You can use one of our standard fonts for your cut Letters for your sign or they can be custom. We can help generate that artwork for you.  If you need help with your flat cut order, just call us at 507 289-86766 or email us at Sales@SVESigns.com.

Manufactured by: Gemini

Polished finishes require a minimum 2" height and 1/4" thickness or 3" height and 1/8" thickness. All Patinas, by their very nature, will vary fromletter to letter and order to order.

Brushed -Alloy C22000

Flat cut Bronze uses alloy C22000: 90% copper and 10% zinc - 0% lead

Polished - Alloy C22000

Polished finishes require a minimum 2" height and 1/4" thickness or 3" height and 1/8" thickness.

Oxidized

Dark Oxidized

Verde Patina

All Patina, by their very nature, will vary from letter to letter and order to order. These finishes will change in appearance over time depending on contact with moisture and temperature. Patinas CAN "BLEED" into the installation surface when installed outside.

Turquoise Patina

All Patina, by their very nature, will vary from letter to letter and order to order. These finishes will change in appearance over time depending on contact with moisture and temperature. Patinas CAN "BLEED" into the installation surface when installed outside.

1/8" thick come plain, but most 3" letters and above can be stud welded. All thickness 1/4" and above are Stud Mount. Stud Weld can not be moved. Mounting this type of letter requires drilling the wall or mounting surface to accept the metal studs.

Plain

Mount with small spots of silicon adhesive directly to a flat dry surface. This option can be a bit messy and care must be taken to ensure that silicon doesn't squeeze out from the sides. Pinhead amounts should be used, dotted around the back surface in strategic locations. Masking tape will be needed to hold the letters in place while the silicon dries. A good alternative is to use some double stick tape in places that will do the initial holding while the silicon sets.

Stud Weld 1/8"

Most 1/8" thick 3" high can be stud welded. All polishing orders require a stud. Mounting this type of letter requires drilling the wall or mounting surface to accept the metal studs.

Stud mount 1/4" - 1/2"

Stud Mounts are required for all polished orders. Mounting this type of letter requires drilling the wall or mounting surface to accept the metal studs. Most 1/8" thick letters can be stud welded.
Reviews