$0.00

Brass Letters: Flat Cut
[FlatCutMetal]

Flat Cut Brass Letters

Gemini Letters for your sign

ALMOST UNLIMITED OPTIONS

Lifetime Guarantee

  • Bronze  Metals, 5 Gauges and 4 Finishes are Available
  • Fast Delivery — Produced in just 7 days
  • Lifetime Guarantee
  • UV stable

Step 1

Step 2

Step 3

Step 4


Step 5

Line 1

Line 2

Line 3

Line 4

The sign is approximately
0" x 0"
Update Display
Line: Upper Case Price: Lower Case Price: Punctuation Price: Line Sub-Total:
Line 1$0.00$0.00$0.00$0.00
Line 2$0.00$0.00$0.00$0.00
Line 3$0.00$0.00$0.00$0.00
Line 4$0.00$0.00$0.00$0.00

Flat Cut Brass Letters

Precision Cut, Custom, Brass Metal Signage Letters

Once designers began using sheet metal for decorative purposes, it was only a matter of time before sign markers began utilizing sheet metals to make metal letters and logos- the sky is the limit in terms of looks and design opportunities. Durable enough for outdoors signage, yet perfect for any interior office signage.

Using waterjets and lasers to precisely cut your custom letters from customer-supplied art files, our flat cut letters provide greater detail than manufacturers who use a router.

Flat Cut Letters for your sign are all custom and required art work. We can generate that artwork for you. By your order you have given us the font, size, and mounting requirements. If you need help with your flat cut order, just call us at 507 289-8676 or email us at Sales@SVESigns.com.

Manufactured by: Gemini

Polishing required a minimum of 2" height and 1/4" thickness or 3" height and 1/8" thickness. Flat cut Brass uses alooy C22000; 90% copper and 10% zinc - no lead

Brushed

Polished

Polished finishes require a minimum 2" height and 1/4" thick or 3" height and 1/8" thick.

Oxidized

Dark Oxidized

1/8" thick come plain, but most 3" letters and above can be stud welded. All thickness 1/4" and above are Stud mount. Stud Weld can not be moved. Mounting this type of letter requires drilling the wall or mounting surface to accept the metal studs.

Plain

Mount with small spots of silicon adhesive directly to a flat dry surface. This option can be a bit messy and care must be taken to ensure that silicon doesn't squeeze out from the sides. Pinhead amounts should be used, dotted around the back surface in strategic locations. Masking tape will be needed to hold the letters in place while the silicon dries. A good alternative is to use some double stick tape in places that will do the initial holding while the silicon sets.

Stud Weld 1/8" thick

Most 1/8" thick 3" high letters can be stud welded. A stud is required for all polished orders. Mounting this type of letter requires drilling the wall or mounting surface to accept the metal studs. Most 1/8" thick 3"high can be stud welded.

Stud mount - 1/4"-3/4"

Stud Mounts are required for all polished orders. Mounting this type of letter requires drilling the wall or mounting surface to accept the metal studs.
Reviews